परिचय

यह दस्तावेज़ एक तकनीकी स्तर पर Freenom एपीआई का वर्णन करता है। यह समर्थित डेटा स्वरूप और कैसे API के साथ बातचीत करने के बारे में बताता है। API द्वारा समर्थित प्रत्येक फंक्शन के लिए वर्णन दिया गया है जिसमें एक उदाहरण शामिल है कि कैसे इस तरह का एक फंक्शन कॉल करता है और प्रतिक्रिया कैसे लग सकती है।

उदाहरण कमांड लाइन उपकरण 'कर्ल' का उपयोग करके दिए गए हैं। कर्ल किसी भी URL का उपयोग करने के लिए एक आसान उपकरण है और यूनिक्स जैसे परिवेशों पर स्थापित किया जाता है।

 

Data formats

The API delivers output in JSON format by default. If the API User prefers, output can be given in XML. The method of output is defined in the function call.

Example: Ping the service

Input
Request
Output
Response

Example: Ping the service expecting XML output. Note the .xml behind the method name.

Input
Request
Output
Response

Examples in this manual are given in XML for readability.


 

Interacting with Freenom API

Interaction with the API should be trivial. The service is a RESTful-like service that interacts over HTTPS. Of all the HTTP methods available, only GET and POST are used. GET calls retrieve information and do not change anything, while POST calls are meant to change data.

POST calls are idempotent for 30 seconds. This allows a caller to resubmit a transaction having it not being executed twice.


 

Common errors

Each function supported by the API has been documented thoroughly. Some errors can occur for a multiple of functions and are described in this chapter. This information will not be repeated in the related function description.

Function not found

In case an unsupported function is called, the service will reply the following:

Not authorized

Most functions can only be executed by authorized users. For these functions authorization must take place. If the user is not authorized to make the call, the content returned will be:

Invalid data submitted

If the function itself is supported, but data submitted is invalid or missing an error will be reported. For example:

Input
Request
Output
Response

The status field will state 'error' when an error occurred. Whenever this field is set to 'error', an element will display the error found.

The service will always reply directly when a first error is found. If there are multiple errors in the function call, only one is returned. This stops the service from doing unnecessary work, as the call will fail in any case.


 

Function parameters

Commonly used parameters

A number of parameters are used in a multiple of functions. Other parameters deserve special attention. Those parameters are explained in this chapter.

domainname

The domain name involved. The domain name should consist of only a-z and 0-9 characters and the - (dash). The dash may not be in the beginning or end of the domain name. Domain names are not case sensitive

forward_url

If the domain is configured for forwarding, the URL to forward traffic for the domain to is given via the forward_url. The forward_url can be any HTTP or HTTPS URL.

nameserver

The nameserver. A nameserver needs to be a hostname that is resolvable if it's a hostname not under the domain name specified.

period

The period of domain registration or renewal. Paid domains are registered in number of years. Supported periods for Paid domains: 1Y, 2Y, 3Y, 4Y, 5Y, 9Y and 10Y. Free domains are registered in number of months. Supported periods for Free domains: 1M - 12M.

idshield

ID Shield is a FREE privacy service that is designed to protect you. Your personal information is not exposed in the WHOIS database, while emails are automatically forwarded - after human interface detection - to the email address we have on file. The two possible values of the parameter: enabled or disabled.

 

Supporting parameters

Supporting parameters are parameters that are not specific to a function call but to the API behavior.

test_mode

When set to 1, the function is discarded after execution. Any changes done to Freenom's database are rolled back.

method

If caller is unable to specify the method of the function by that method, this parameter can help. Setting the method parameter to 'post' will tell the service that a POST method is meant by caller. Same counts for 'get', 'put' and 'delete'.

 

The multiple flag

Function parameters are described in a table for each function. One of the columns in this table is labeled "multiple". This indicates whether or not the parameter can be specified more than once.

An example call would look like this:

 

API functions

 

Ping the service

Input
URL: https://api.freenom.com/v2/service/ping
Method: GET
Input
Description: This function allows the user to check the status of the server. The server will return its latest timestamp.

Parameters: None.

Returned properties
Property Description
result PING REPLY
timestamp YYYY-MM-DD HH24:MI:SS UTC
status OK

 

Example:

Input
Request
Output
Response

 


Search for available domains

Input
URL: https://api.freenom.com/v2/domain/search
Method: GET
Input
Description: This function allows the API user to search a domain for availability.
Parameters
Parameter Description Required Multiple
domainname The name of the domain Yes No
email E-mail address used for authentication No No
password Password used for authentication No No
domaintype The type of the domain: PAID or FREE Yes No

 

Returned properties
Property Description Type
result DOMAIN AVAILABLE or DOMAIN NOT AVAILABLE Both
domain One or multiple hashes with result of domain name search Both
 domainname The domain name as requested Both
 domaintype The domaintype of the searched domain name. Both
 pricing Multiple hashes of pricing info for domainname. Paid
  currency The currency for given prices Paid
  period The registration period for given price. Paid
  partnerprice The amount to be paid by the reseller Paid
  retailprice The amount to be paid by the enduser. (public price) Paid
 status AVAILABLE or NOT AVAILABLE Both
status OK Both

 

Example: Check the availability of domain test001.tk

Input
Request
Output
Response

Register a domain

Input
URL: https://api.freenom.com/v2/domain/register
Method: POST
Input
Description: Use this function to register a domain.
Parameters
Parameter Description Required Multiple
domainname The name of the domain Yes No
period The period of registration. If not given it will default to 1Y for paid domains and will default to 3M for free domains No No
forward_url The URL the domain name should forward to No* No
forward_mode The type of forward. Can be cloak or 301_redirect. cloak is default. No No
nameserver Nameserver to use. A minimum of 2 nameservers is required No* Yes
owner_id Contact ID of domain owner Yes** No
billing_id Contact ID of billing contact No No
tech_id Contact ID of technical contact No No
admin_id Contact ID of admin contact No No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No
domaintype The type of the domain: PAID or FREE Yes No
idshield Identity protection parameter, possible values : enabled or disabled No** No
autorenew Autorenewal setting for this domain. Possible values: enabled or disabled. No No


Notes: * forward_url and nameservers are mutual exclusive. Either the forward_url OR nameservers need to be specified. It is not possible to specify both. In case the nameserver is under the same domain, a glue record must be created for this domain. This can be done by registering Nameserver records.

** In case idshield is enabled owner_id doesn't need to be specified.

Returned properties
Property Description Type
result DOMAIN REGISTERED or NOT AVAILABLE Both
domain One or multiple hashes with result of domain name registration Both
 currency The currency for given prices Paid
 domainname The domain name as requested Both
 domaintype The domaintype of the checked domainname Both
 expirationdate The date the domain will expire in YYYYMMDD Both
 period The registration period of the registered domainname Both
 partnerprice The amount to be paid by the reseller Paid
 retailprice The amount to be paid by the enduser. (public price) Paid
 owner_id Contact ID of domain owner Paid
 tech_id Contact ID of technical contact Paid
 billing_id Contact ID of billing contact Paid
 admin_id Contact ID of administrative contact Paid
 status REGISTERED or NOT AVAILABLE Both
 authcode Generated authorization code Paid
 autorenew Autorenewal flag. Either enabled or disabled. Paid
status OK Both

 

Example: Registering a domain for 2 years with nameservers under the domain.

Input
Request
Output
Response

Renew a domain name registration

Input
URL: https://api.freenom.com/v2/domain/renew
Method: POST
Input
Description: This function must be used to renew a domain registration.
Parameters
Parameter Description Required Multiple
domainname The name of the domain Yes No
period The period of registration. If not given it will default to 1Y for paid domains and will default to 3M for free domains No No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No
Returned properties
Property Description Type
result DOMAIN RENEWED or NOT AVAILABLE Paid
domain One or multiplehashes with result of domain name renewal Both
 currency The currency for given prices Paid
 domainname The domain name as requested Both
 domaintype The domaintype of the checked domainname Both
 expirationdate The date the domain will expire in YYYYMMDD Both
 period The registration period of the registered domainname Both
 partnerprice The amount to be paid by the reseller Paid
 retailprice The amount to be paid by the enduser. (public price) Paid
 owner_id Contact ID of domain owner Paid
 tech_id Contact ID of technical contact Paid
 billing_id Contact ID of billing contact Paid
 admin_id Contact ID of administrative contact Paid
 status RENEWED or NOT AVAILABLE Both
status OK Both

 

Example: Renewal of paid domain TEST001.TK for three years.

Input
Request
Output
Response

Get info on registered domain names

Input
URL: https://api.freenom.com/v2/domain/getinfo
Method: GET
Input
Description: Retrieve information about a domain registered by the requesting user.
Parameters
Parameter Description Required Multiple
domainname The name of the domain Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No
Returned properties
Property Description Type
result DOMAIN LISTED Both
domain One or multiple hashes with result of domain name search Both
 domainname The domain name as requested Both
 domaintype The domaintype of the checked domainname Both
 expirationdate The date the domain will expire in YYYYMMDD Both
 authcode The authorization code Paid
 autorenew Autorenewal flag. Either enabled or disabled. Paid
 pricing Multiple hashes with pricing info for domain name Paid
  currency The currency for given prices Paid
  period The registration period of the checked domainname Paid
  partnerprice The amount to be paid by the reseller Paid
  retailprice The amount to be paid by the enduser. (public price) Paid
 status ACTIVE or CANCELLED; Status of the domain Both
 forward_url The URL the domain name should forward to Both
 forward_mode The type of forward. Can be cloak or 301_redirect. cloak is default. Both
 nameserver Zero or multiple hashes with nameserver info Both
  hostname Hostname of nameserver Both
  ipaddress IP address of nameserver if glue present Both
 owner_contact Hash containing contact data of owner Paid
  contact_id Contact ID of owner contact Paid
  contact_title Title of contact; Mr, Mrs, etc. Paid
  contact_firstname Firstname of contact Paid
  contact_middlename Middle name of owner contact Paid
  contact_lastname Lastname of owner contact Paid
  contact_organization Organization name of owner (if any) Paid
  contact_address Address of owner contact Paid
  contact_city City of owner contact Paid
  contact_zipcode Zipcode of owner contact Paid
  contact_statecode Statecode (ISO 3166-2) of owner contact Paid
  contact_countrycode Countrycode (ISO 3166-1) of owner contact Paid
  contact_phone Phone number of owner contact Paid
  contact_fax Fax number of owner contact Paid
  contact_email Email address of owner contact Paid
 admin_contact Hash containing contact data of admin Paid
  contact_id Contact ID of admin contact Paid
  contact_title Title of contact; Mr, Mrs, etc. Paid
  contact_firstname Firstname of admin contact Paid
  contact_middlename Middle name of admin contact Paid
  contact_lastname Last name of admin contact Paid
  contact_organization Organization name of admin (if any) Paid
  contact_address Address of admin contact Paid
  contact_city City of admin contact Paid
  contact_zipcode Zipcode of admin contact Paid
  contact_statecode Statecode (ISO 3166-2) of admin contact Paid
  contact_countrycode Countrycode (ISO 3166-1) of admin contact Paid
  contact_phone Phone number of admin contact Paid
  contact_fax Fax number of admin contact Paid
  contact_email Email address of admin contact Paid
 tech_contact Contact ID of tech contact Paid
  contact_id Contact ID of tech contact Paid
  contact_title Title of contact; Mr, Mrs, etc. Paid
  contact_firstname Firstname of tech contact Paid
  contact_middlename Middlename of tech contact Paid
  contact_lastname Lastname of tech contact Paid
  contact_organization Organization name of tech (if any) Paid
  contact_address Address of tech contact Paid
  contact_city City of tech contact Paid
  contact_zipcode Zipcode of tech contact Paid
  contact_statecode Statecode (ISO 3166-2) of tech contact Paid
  contact_countrycode Countrycode (ISO 3166-1) of tech contact Paid
  contact_phone Phone number of tech contact Paid
  contact_fax Fax number of tech contact Paid
  contact_email Email address of tech contact Paid
 billing_contact Hash containing contact data of billing contact Paid
  contact_id Contact ID of billing contact Paid
  contact_title Title of contact; Mr, Mrs, etc. Paid
  contact_firstname Firstname of billing contact Paid
  contact_middlename Middlename of billing contact Paid
  contact_lastname Lastname of billing contact Paid
  contact_organization Organization name of billing (if any) Paid
  contact_address Address of billing contact Paid
  contact_city City of billing contact Paid
  contact_zipcode Zipcode of billing contact Paid
  contact_statecode Statecode (ISO 3166-2) of billing contact Paid
  contact_countrycode Countrycode (ISO 3166-1) of billing contact Paid
  contact_phone Phone number of billing contact Paid
  contact_fax Fax number of billing contact Paid
  contact_email Email address of billing contact Paid
status OK Both

 

Example: Customer retrieves info on domain TEST002.TK.

Input
Request
Output
Response

Modifying a domain

Input
URL: https://api.freenom.com/v2/domain/modify
Method: PUT
Input
Description: If a domain's DNS settings or URL forwarding is to be updated, this function will offer functionality for that.
Parameters
Parameter Description Required Multiple
domainname The name of the domain Yes No
forward_url The URL the domain name should forward to No* No
forward_mode The type of forward. Can be cloak or 301_redirect. cloak is default. No No
nameserver Nameserver to use. Minimally 2 are needed No* Yes
owner_id Contact ID of domain owner No No
admin_id Contact ID of administrative contact No No
tech_id Contact ID of technical contact No No
billing_id Contact ID of billing contact No No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No
idshield Identity protection parameter, possible values : enabled or disabled No No
autorenew Autorenewal setting for this domain. Possible values: enabled or disabled. No No

 

Notes: * forward_url and nameservers are mutual exclusive. Either the forward_url OR nameservers need to be specified. It is not possible to specify both. In case the nameserver is under the same domain, a glue record must be created for this domain. This can be done by registering Nameserver records.

 

Returned properties
Property Description Type
domain One or multiple hashes with result of domain name modification All
 domainname The requested domain name All
 status MODIFIED All
result DOMAIN MODIFIED All
status OK All

 

Example: Modify domain TEST002.TK, having it forward to http://www.freedomregistry.com/

Input
Request
Output
Response

Deleting a domain

Input
URL: https://api.freenom.com/v2/domain/delete
Method: DELETE
Input
Description: This function will delete the domain from the account. The domain name will immediately be available to other registrants once it has been cancelled.
Parameters
Parameter Description Required Multiple
domainname The name of the domain Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
domain One or multiple hashes with result of domain deletion All
 domainname Domain name that was deleted All
 status DELETED All
 result DOMAIN DELETED All
status OK All

 

Example: Delete TEST002.TK

Input
Request
Output
Response

Restore a domain

Input
URL: https://api.freenom.com/v2/domain/restore
Method: POST
Input
Description: This function will restore a domain to the account if possible
Parameters
Parameter Description Required Multiple
domainname The name of the domain Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
domain One or multiple hashes with result of domain restore All
 domainname Domain name that was restored All
 result DOMAIN RESTORED All
 status RESTORED All
status OK All

 

Example:

Input
Request
Output
Response

Upgrade a domain

Input
URL: https://api.freenom.com/v2/domain/upgrade
Method: POST
Input
Description: Upgrade a free domain to paid domain
Parameters
Parameter Description Required Multiple
domainname The name of the domain Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No
owner_id Contact ID of owner contact No** No
billing_id Contact ID of billing contact No No
admin_id Contact ID of admin contact No No
tech_id Contact ID of technical contact No No
idshield Identity protection parameter, possible values : enabled or disabled No** No
period Number of years to add to domain expiration, after the domain has been upgraded. Yes Yes

Notes: ** In case idshield is enabled owner_id doesn't need to be specified.

Returned properties
Property Description Type
domain One or multiple hashes with result of domain upgrade All
 domainname Domain name that was upgraded All
 result DOMAIN UPGRADED All
 status UPGRADED All
status OK All

 

Example: Upgrade a free domain to paid domain

Input
Request
Output
Response

List domains in account

Input
URL: https://api.freenom.com/v2/domain/list
Method: GET
Input
Description: Lists all domains under the account
Parameters
Parameter Description Required Multiple
pagenr Page number of results. Defaults to 1 No No
results_per_page Number of results per page. Defaults to 25 No No
email E-mail address used for authentication No No
password Password used for authentication No No

 

Returned properties
Property Description Type
domain One or multiple hashes with result of domain deletion Both
 domainname The name of the domain Both
 domaintype Type of the domain Both
 registrationdate The date the domain was registered in YYYYMMDD Both
 expirationdate The date the domain will expire in YYYYMMDD Both
 status ACTIVE or CANCELLED; Status of the domain Both
 authcode The authorization code Paid
 autorenew Autorenewal flag. Either enabled or disabled. Paid
result DOMAINS FOUND Both

 

Example:

Input
Request
Output
Response

Register or modify a nameserver glue record

Input
URL: https://api.freenom.com/v2/nameserver/register
Method: PUT
Input
Description: When the domain's DNS is managed by custom nameservers and the nameservers are under the domain, nameserver glue records are required to get the domain working. Nameserver glue records can be registered using this function.
Parameters
Parameter Description Required Multiple
domainname Domain name of glue record Yes No
hostname Domain name of glue record Yes No
ipaddress Value of DNS record Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result NAMESERVER REGISTERED or NAMESERVER UPDATED All
nameserver One or multiple hashes with result of nameserver registration All
 domainname Domain name of zone to add DNS record All
 hostname The hostname of the glue record All
 ipaddress The IP address of the glue record All
 status REGISTERED or UPDATED All
status OK All

 

Example: Register a nameserver glue for TEST002.TK

Input
Request
Output
Response

Deleting a nameserver glue record

Input
URL: https://api.freenom.com/v2/nameserver/delete
Method: DELETE
Input
Description: Nameserver glue records registered via the nameserver/register method can be deleted via this function. nameservers are under the domain, nameserver glue records are required to get the domain working. Nameserver glue records can be registered using this function.
Parameters
Parameter Description Required Multiple
domainname Domain name of glue record Yes No
hostname The hostname to delete Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result NAMESERVER DELETED All
nameserver One or multiple hashes with result of nameserver delete All
 domainname Domain name of zone All
 hostname The nameserver that was deleted All
 status DELETED All
status OK All

 

Example: Register a nameserver glue for TEST002.TK

Input
Request
Output
Response

Listing nameserver glue records under a domain

Input
URL: https://api.freenom.com/v2/nameserver/list
Method: GET
Input
Description: This function is used to retrieve a list of nameserver glue records registered under a domain name.
Parameters
Parameter Description Required Multiple
domainname The domain name to list nameserver glue for Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result ENTRIES - number of entries found All
nameserver Name for DNS record All
 domainname The requested domain name All
 hostname Value for DNS record All
 ipaddress IP addres linked to the nameserver host All
status OK All

 

Example: Requesting the DNS names registered under TEST002.TK

Input
Request
Output
Response

 

Functions related to contact management

 

Create or Modify contact

Input
URL: https://api.freenom.com/v2/contact/register
Method: PUT
Input
Description: Creating a new contact can be done with this function. The contact is not linked to any domain after being created; this needs to be done by new domain registration or modification.
Parameters
Parameter Description Required Multiple
contact_organization Organization name of contact No No
contact_title Title of the contact No No
contact_firstname First name of contact Yes No
contact_middlename Middle name of contact No No
contact_lastname Last name of contact Yes No
contact_address Address of the contact Yes No
contact_city City of the contact Yes No
contact_zipcode Zipcode of the contact Yes No
contact_statecode ISO-3166 code for state Yes No
contact_countrycode ISO-3166 code for country Yes No
contact_phone Phone number of contact (international format) Yes No
contact_fax Fax number of contact (international format) No No
contact_email Email address of contact Yes No
contact_id ID of existing contact No No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result CONTACT REGISTERED / CONTACT UPDATED Paid
contact One or multiple hashes with contacts affected Paid
 contact_id ID of the registered or updated contact Paid
 status REGISTERED / UPDATED Paid
status OK Paid

 

Example: Register Contact

Input
Request
Output
Response

 


Delete contact

Input
URL: https://api.freenom.com/v2/contact/delete
Method: DELETE
Input
Description: Deleting a new contact can be done with this function. Contacts can only be deleted if they are not linked to any domain.
Parameters
Parameter Description Required Multiple
contact_id ID of contact Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result CONTACT DELETED Paid
contact One or multiple hashes with contacts affected Paid
 contact_id ID of the deleted Paid
 status DELETED Paid
status OK Paid

 

Example: Delete Contact

Input
Request
Output
Response

 


Get info on specific contacts

Input
URL: https://api.freenom.com/v2/contact/getinfo
Method: GET
Input
Description: List details of contacts under user account.
Parameters
Parameter Description Required Multiple
contact_id One or more contact id to get info on Yes Yes
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result CONTACTS LISTED Paid
contact Array of one or multiple contacts Paid
 contact_id ID of contact Paid
 contact_title Title of the contact Paid
 contact_firstname First name of contact Paid
 contact_middlename Middle name of contact Paid
 contact_lastname Last name of contact Paid
 contact_organization Organization name of contact Paid
 contact_address Address of the contact Paid
 contact_city City of the contact Paid
 contact_zipcode Zipcode of the contact Paid
 contact_statecode Country of contact Paid
 contact_countrycode State of contact Paid
 contact_phone Phone number of contact (international format) Paid
 contact_fax Fax number of contact (international format) Paid
 contact_email Email address of contact Paid
 contact_domain Array of one or multiple domains contact is linked to Paid
  domainname Name of domain contact is linked to Paid
  type Contact type (owner, tech, admin or billing) Paid
status OK Paid

 

Example: Get info on one contact_id

Input
Request
Output
Response

 


List contacts under account

Input
URL: https://api.freenom.com/v2/contact/list
Method: GET
Input
Description: List all contacts under users account.
Parameters
Parameter Description Required Multiple
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result CONTACTS LISTED Paid
contact Array of one or multiple contacts Paid
 contact_id ID of contact Paid
 contact_title Title of the contact Paid
 contact_firstname First name of contact Paid
 contact_middlename Middle name of contact Paid
 contact_lastname Last name of contact Paid
 contact_organization Organization name of contact Paid
 contact_address Address of the contact Paid
 contact_city City of the contact Paid
 contact_zipcode Zipcode of the contact Paid
 contact_statecode Country of contact Paid
 contact_countrycode State of contact Paid
 contact_phone Phone number of contact (international format) Paid
 contact_fax Fax number of contact (international format) Paid
 contact_email Email address of contact Paid
 contact_domain Array of one or multiple domains contact is linked to Paid
  domainname Name of domain contact is linked to Paid
  type Contact type (owner, tech, admin or billing) Paid
status OK Paid

 

Example: List Contacts.

Input
Request
Output
Response

 

Functions related to domain transfers

 

Get price of a domain transfer

Input
URL: https://api.freenom.com/v2/domain/transfer/price
Method: GET
Input
Description: Transfers are made by gaining partners that use an obtained authorization code from the registrant or the losing partner. All transfers are subject to a one year renewal. Before a transfer is made the gaining partner may request the retail price and partner price of the transfer (and therefore the one year renewal). This API call only provides prices and does not perform the actual transfer.
Parameters
Parameter Description Required Multiple
domainname The domainname Yes No
authcode The authorization code Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
transfer Array of one or multiple transfers Paid
 domainname Domain name updated Paid
 domaintype Type of the domain Paid
 period Length of renewal after transfer; always 1Y Paid
 currency The currency for given prices Paid
 retailprice Price for registrant Paid
 partnerprice Price for partner Paid
result PRICES PROVIDED Paid
status OK Paid

 

Example: Request transferprice for TEST002.TK

Input
Request
Output
Response

 


Request a domain transfer

Input
URL: https://api.freenom.com/v2/domain/transfer/request
Method: POST
Input
Description: Transfer requests are performed by resellers that wish to transfer domain names from other resellers or registrars to their own account.
Please note: A domain transfer for a .TK, .ML, .CF, .GA or .GQ domain will be directly approved if the request has the correct authorization code.

Parameters
Parameter Description Required Multiple
domainname The name of the domain Yes No
authcode The authorization code Yes No
period Number of years to renew the domain. Defaults to 1Y Yes No
owner_id contact_id of new owner Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result TRANSFER REQUESTED Paid
transfer Array of one or more transfers Paid
 domainname Domain name updated Paid
 status REQUESTED Paid
status OK Paid

 

Example: Transfer domain TEST002.TK to our account

Input
Request
Output
Response

 


Approve a domain transfer

Input
URL: https://api.freenom.com/v2/domain/transfer/approve
Method: POST
Input
Description: Approve an outgoing domain transfer.
Parameters
Parameter Description Required Multiple
domainname The domainname Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result TRANSFER APPROVED Paid
transfer Array of one or more transfers Paid
 domainname Domain name updated Paid
 status APPROVED Paid
status OK Paid

 

Example: Approce transfer of domainTEST002.TK from our account.

Input
Request
Output
Response

 


Decline a domain transfer

Input
URL: https://api.freenom.com/v2/domain/transfer/decline
Method: POST
Input
Description: Decline an outgoing domain transfer.
Parameters
Parameter Description Required Multiple
domainname The domain name Yes No
reason Reason of declining the transfer Yes No
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result TRANSFER DECLINED Paid
transfer Array of one or more transfers Paid
 domainname Domain name updated Paid
 status DECLINED Paid
status OK Paid

 

Example: Decline a domain transfer of TEST002.TK from our account.

Input
Request
Output
Response

 


List current domain transfers

Input
URL: https://api.freenom.com/v2/domain/transfer/list
Method: GET
Input
Description: Retrieve a list of domain transfers. Domain transfers that are in final status approved or declined will be listed for a week after the transfer update.
Parameters
Parameter Description Required Multiple
email E-mail address used for authentication Yes No
password Password used for authentication Yes No

 

Returned properties
Property Description Type
result TRANSFERS LISTED Paid
transfer Zero, one or multiple entries containing information about the domain transfer Paid
 domainname The name of the domain Paid
 transfertype Incoming or outgoing Paid
 status Status of the transfer. PENDING, APPROVED, DECLINED Paid
 newregistrar In case of outgoing transfer, name of new registrar Paid
 lastupdate Date of last update Paid

 

Example: Retrieve a list of domain transfers

Input
Request
Output
Response